Precision parts manufacturers attach great importance to the machining and surface treatment of components, so the operation process is also quite strict. Surface treatment can extend the product's lifespan and improve its quality. Due to the need for polishing treatment on the surface of components, not only can it be influenced by the process and polishing equipment, but the polishing itself will also be affected by the material. Therefore, the technology to improve the surface performance of components needs to be upgraded, but the most common ones are hardening film deposition, nitrogen infiltration, and carburizing technology.

Precision parts manufacturers explain machining precautions
Before starting the mechanical work, check whether the moving parts have been lubricated, then start and check whether the clutch and brake are normal, and run the machine idle for 1-3 minutes. It is strictly prohibited to operate the machine if there is a malfunction.

Maintain the correct posture while working and have sufficient mental energy to cope with the work. If you feel unwell, immediately leave your work post and report it to your leader. During operation, one must concentrate their thoughts, avoid casual conversations, and cooperate with each other. Operators should not operate in a state of irritability or fatigue to avoid accidents and ensure safe operation. All employees are required to check if their clothing meets the job requirements before entering the workplace. Do not wear slippers, high heels, or clothing that may affect safety. Those with long hair must wear a safety helmet.

When replacing the mold, the power should be turned off first, and the punching machine movement department should stop running before starting to install and debug the mold. After installation and adjustment, move the flywheel twice by hand to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the edge pressing ring is in a reasonable position.

Only after all other personnel have left the mechanical work area and removed the debris from the workbench, can the power be turned on to start the machinery.

Precision parts manufacturer surface treatment:
Because nitriding technology can achieve high levels of surface performance, and the process of nitriding technology is highly coordinated and consistent with the quenching process of steel in precision components. Moreover, the nitriding temperature is very low, so there is no need for intense cooling processes after nitriding technology treatment. Therefore, the deformation of precision components will be very small. Therefore, nitriding technology is also one of the early technologies used to strengthen surface performance in precision component processing, and it is currently widely used.